WANLIN-303
Standalone photoelectric smoke alarm family
Review standalone, 433 MHz, LoRa or 4G candidates only after the exact hardware and radio version is identified.
Direct answer
What does standalone detection mean?
An export standalone smoke alarm detects smoke and provides a local audible warning without requiring a conventional fire alarm control panel. For IoT monitoring, buyers should first define the protected space, required local alarm behaviour, reporting method, power arrangement and destination-market evidence.
This page is written for IoT platform operators and retrofit monitoring integrators. It is a product-family selection resource, not a claim that every variant has the same approval, radio module or market access.
Model reference image
Review the exact configuration, not only the family name
The image identifies a WANLIN-307 family reference. Radio, power, label and evidence scope can differ by controlled configuration; confirm the SKU/BOM before using any formal product or compliance statement.
Open the WANLIN-307 product passport · Review the public evidence center
Verified manual data
WANLIN-307 documented configuration
Evidence scope: WANLIN-307 user manual, Ver 1.0. Documented manual configuration only; radio, platform, power and market variants require separate SKU/BOM confirmation.
| Detection principle | Infrared photoelectric smoke sensing with MCU processing |
|---|---|
| Rated working voltage | DC 3 V |
| Battery capacity | 2400 mAh |
| Standby current | ≤ 6 μA |
| Alarm current | ≤ 100 mA |
| Sound pressure | > 80 dB(A) at 3 m directly in front |
| Operating temperature | −10 °C to +50 °C |
| Relative humidity | ≤ 95% RH at 40 °C ± 2 °C |
| Alarm output | Audible and visual alarm |
| Low-voltage indication | Below 2.7 V; indicator and one chirp about every 40 s |
| Normal indicator | Indicator illuminates about every 40 s |
| Approximate weight | 140 g including battery |
| Manual-listed execution standard | GB 20517-2006 |
| Installation reference | GB 50116-2013; final layout must follow project design requirements |
Important: “GB 20517-2006” is presented here as the execution standard stated by this manual. This wording is not a third-party certificate claim and does not establish destination-market acceptance. The manual also advises against use where relative humidity exceeds 95%, air speed exceeds 5 m/s, or heavy dust, water mist, steam, oil mist or corrosive gas is present.
Site-specific planning lens
How does IoT Fire Alarm Systems affect selection?
System integrators should also describe gateway placement, network ownership, event recipients, escalation rules and any required API or platform handoff.
Existing site context: Wanlin Fire presents IoT Fire Alarm Systems with clear selection criteria, technical support, system compatibility details and global project supply options. Use that context to define the application; it does not replace model-specific technical or compliance review.
A retrofit project should record mounting constraints, existing network availability and whether the buyer expects a self-contained device or integration with a wider platform.
For this site's IoT monitoring focus, the planning lens is “IoT Fire Alarm Systems.” Start with the decision that changes the architecture most: local alarm only, or local alarm plus remote event reporting.
A family-level brochure is useful for selection but is not proof that every radio, enclosure, battery or sensor configuration has identical market acceptance.
Last reviewed: 2026-11-02 · Reviewed by Wanlin Fire Equipment for product-family and evidence-boundary consistency.
Which evidence should an importer request?
- Identify the destination market
- Freeze the exact configuration
- Match evidence to the configuration
- Review labels and instructions
- Approve the production reference
How do the Wanlin model families differ?
WANLIN-307
Connected standalone smoke alarm family
Candidate configurations may include standalone, 433 MHz, LoRa, 4G or NB-IoT; availability and evidence must be confirmed per SKU/BOM.
WANLIN-309
Wireless reporting smoke alarm family
Use when the project requires a local alarm plus a defined reporting path; verify gateway, network and destination-market requirements.
WANLIN-370
Combination alarm reference
A smoke/heat/carbon-monoxide combination concept is not interchangeable with a smoke-only alarm; confirm the required sensing functions first.
Answers for buyers
Standalone smoke alarm questions
Which project details are needed for an accurate recommendation?
Provide the destination country, building type, quantity, required sensing functions, power preference, local-only or remote reporting need, radio or network constraints, packaging needs and target schedule.
What is the difference between a certificate and a test report?
A certificate states a defined certification scope, while a test report records tests on identified samples or configurations. Neither should be extended to an unlisted model or variant.
How should connected alarms behave during a network outage?
The project team should document local alarm behaviour, event buffering or retry expectations, supervision, user notification and the party responsible for restoring connectivity.
Who confirms destination-market acceptance?
The importer or another qualified party familiar with the destination requirements should confirm acceptance against current documents before an order is represented as market ready.
How should a buyer compare LoRa and cellular reporting?
Compare gateway dependence, local coverage, carrier availability, operating cost, commissioning, outage behaviour, event latency and the evidence required for the chosen radio hardware.
Request a model-specific export review
Send the destination country, application, quantity, reporting method, preferred power arrangement and required delivery schedule to wanlinfirecontrol@163.com. Recommendations and formal claims remain subject to exact-model evidence review.
Browse product information · Read technical FAQs · Contact Wanlin Fire